Example Windows client installation with audio device Behringer U-CONTROL UCA202

The following instructions might be similar with other audio devices.

Plug in your Behringer U-CONTROL UCA202 into an USB port. In the future do always use the same USB port for the audio device. Download and install the Behringer U-CONTROL UCA202 device driver (you can download it here: http://www.behringer.com/EN/Products/UCA202.aspx). Follow the installation instructions in the README file and the installer software.

After you have successfully installed the driver start Jamulus.

Open the general settings page and make sure you are using the Behringer audio device driver. You can push the ASIO setup button to see the Behringer device control panel - the standard settings work fine.

Make sure you have switched off the monitor button on your Behringer U-CONTROL UCA202 (otherwise you will here the original sound you are sending to the Jamulus server and the returning sound from the server).

Plugin your instrument into the input plugs of the Behringer U-CONTROL UCA202. Plugin your headphones into the Behringer U-CONTROL UCA202.

Connect with a Jamulus server.

Start jamming and have fun.